Home > What are the Installation Requirements for Distribution Boxes?
Products Catalogue
- Insulating Paper
- Composite Insulating Material
- Insulation Film
- Glass Fiber Sleeving
- Tape
- Laminated Products
- Mica Products
- Transformer Insulating parts
- Transformer Spare Parts
- Current Transformer
- Bimetal thermometer
- Dehydration of respite
- Hollow Porcelain Insulators
- Transformer bushings
- Magnetic wire
- Cable / Cable accessories
- Electric Motor Spare Parts
- Ring Main Units
Tags
What are the Installation Requirements for Distribution Boxes?
1.Distribution box application of non-combustible materials;
2.Open distribution board can be installed in production places and offices with small electric shock risk;
3.In the danger of electric shock or poor working environment of the processing workshop, casting, forging, heat treatment, boiler room, woodworking room and other places, should be installed closed box cabinet;
4.Sealed or explosion-proof electrical facilities must be installed in dangerous working places with conductive dust or flammable and explosive gases;
5.Distribution box electrical components, instruments, switches and lines should be arranged neatly, firmly installed, easy to operate;
6.The bottom of the floor installation plate (box) should be 5~10mm above the ground;
7.Operating handle center height is generally 1.2 ~ 1.5m;
8.There are no obstacles in the range of 0.8 ~ 1.2m in front of the box;
9.The protection line connection is reliable;
10.There shall be no naked charged dew outside the box;
11.The electrical components that must be installed on the outer surface of the box or on the power distribution board must have reliable screen protection.