How to Select Lightning Protection Measures for Distribution Transformers?

How to Select Lightning Protection Measures for Distribution Transformers?

1. In areas with few lightning strikes such as plains, the annual damage rate of distribution transformers is relatively low. Therefore, it is sufficient to only install lightning arresters on the high-voltage side of the distribution transformer.

2. In areas with moderate lightning activity, it is necessary to install lightning arresters on both the high-voltage and low-voltage sides of the distribution transformer.

3. In areas with frequent lightning strikes, using a single type of lightning protection measure is unlikely to be effective. Therefore, a comprehensive lightning protection measure should be adopted, where lightning arresters are installed on the high-voltage side and grounded separately, while the lightning arresters on the low-voltage side, the neutral point on the low-voltage side, and the metal casing of the transformer are connected together for separate grounding.

4. In areas with severe lightning strikes, especially in regions where the annual damage rate of distribution transformers is high, if the comprehensive lightning protection measures do not achieve satisfactory lightning protection effects, a technical and economic comparison should be conducted. Then, a balance winding can be added to the core of the distribution transformer, or a metal oxide lightning arrester can be installed inside the distribution transformer.