Home > Glass Fiber Sleeving > FIBERGLASS SLEEVING COATED WITH ACRYLIC RESIN

Glass Fiber Sleeving > FIBERGLASS SLEEVING COATED WITH ACRYLIC RESIN

FIBERGLASS SLEEVING COATED WITH ACRYLIC RESIN

FIBERGLASS SLEEVING COATED WITH ACRYLIC RESIN

 

FIBERGLASS SLEEVING COATED WITH ACRYLIC RESIN
(JB/T 8151.3-1999 eqv IEC 60684-3-403 TO 405)
Fiberglass sleeving coated with acrylic resin is manufactured with non-alkali fiberglass braided sleeving and coated with a layer of acrylic resin and then thermoset to form F grade insulating sleeving. It possesses reliable heat resistance, good qualities of dielectric, fair softness elasticity and flame resistance. It can be used for wiring insulation and as mechanic protection for motors, electrical instruments and wireless sets.
Appearance:
Smooth surface, clear and neat ends.
Length:
Usually as 1000+20-10mm,Continuous length may be negotiated.
 
Inside Diameter And Wall Thickness
   Nominal Size        Tolerance     Wall Thickness
      0.5-0.8          ±0.10 0.20-0.30
      1.0-1.5          ±0.15 0.20-0.35
      2.0-2.5          ±0.20 0.25-0.45
      3.0-6.0          ±0.25 0.30-0.60
     7.0-10.0          ±0.50 0.40-0.75
    12.0-18.0          ±0.50 0.60-1.00
    20.0-30.0          ±0.50 0.70-1.40
 
Breakdown voltage:
Test condition                Axes 25mm,electrode type                     Type
   2740-1   2740-2   2740-3
Center value   ≥7.0   ≥4.0   ≥2.5
Lowest individual value   ≥5.0   ≥2.5   ≥1.5

Fiberglass sleeving coated with acrylic resin is manufactured with non-alkali fiberglass braided sleeving and coated with a layer of acrylic resin and then thermoset to form F grade insulating sleeving.
Features:
1.Appearance: Smooth surface, clear and neat ends.
2.Length:Usually as 1000+20-10mm,Continuous length may be negotiated.
3.Standard: JB/T 8151.3-1999 eqv IEC 60684-3-403 TO 405
Advantages:
1.Reliable heat resistance
2.Good qualities of dielectric
3.Fair softness elasticity
4.Flame resistance.
Application:
It can be used for wiring insulation and as mechanic protection for motors, electrical instruments and wireless sets.
Inside Diameter And Wall Thickness:                        mm

 Nominal Size

Tolerance

Wall Thickness

0.5-0.8

 ±0.10

0.20-0.30

1.0-1.5

±0.15

0.20-0.35

2.0-2.5

±0.20

0.25-0.45

3.0-6.0

±0.25

0.30-0.60

7.0-10.0

±0.50

0.40-0.75

12.0-18.0

 ±0.50

0.60-1.00

20.0-30.0

 ±0.50

0.70-1.40

30.0-40.0

 ±0.50-1.00

0.70-1.40

 

Breakdown voltage:                                       KV

 

Test condition                

Axes 25mm,electrode type

Type

2740-1

2740-2

2740-3

Center value

≥7.0

≥4.0

≥2.5

Lowest individual value

≥5.0

≥2.5

 ≥1.5