Home > Glass Fiber Sleeving > FIBERGLASS SLEEVING COATED WITH SILICONE RUBBER

Glass Fiber Sleeving > FIBERGLASS SLEEVING COATED WITH SILICONE RUBBER

FIBERGLASS SLEEVING COATED WITH SILICONE RUBBER

FIBERGLASS SLEEVING COATED WITH SILICONE RUBBER

Fiberglass sleeving coated with silicone rubber produced with the process of thermal treament and vulcanization, is the non-alkali fiberglass braided sleeving coated with silicone rubber.

Features:

1.Appearance: Smooth surface, clear and neat ends.

2.Length: Usually as 1000+20-10mm, continuous length may be negotiated.

3.Standard: JB/T 8151.1-1999 eqv IEC 60684-3-400 TO 402

Advantages:

1.Good qualities of dielectric

2.High temperature resistance

3.Cold resistance

Application:

It can be used as wiring insulator for class H electrical machinery, special bulbs, electrical soldering irons, electrical irons, electrical rice cookers as well as other household appliances and their protection devices.

Inside Diameter And Wall Thickness :                       mm

FIBERGLASS SLEEVING COATED WITH SILICONE RUBBER
(JB/T 8151.1-1999 eqv IEC 60684-3-400 TO 402)
Fiberglass sleeving coated with silicone rubber produced with the process of thermal treament and vulcanization, is the non-alkali fiberglass braided sleeving coated with silicone rubber.
This sleeving possesses good qualities of dielectric、high temperature resistance and cold resistance, can be used as wiring insulator for class H electrical machinery、special bulbs、electrical soldering irons、electrical irons、electrical rice cookers as well as other household appliances and their protection devices.
Appearance:
Smooth surface, clear and neat ends.
Length:
Usually as 1000+20-10mm,Continuous length may be negotiated.
 
Inside Diameter And Wall Thickness :
     Nominal Size Tolerance     Wall Thickness
        0.5-0.8   ±0.10       0.20-0.40
        1.0-3.0   ±0.20       0.25-0.50
        3.5-8.0   ±0.25       0.35-1.00
       9.0-12.0   ±0.50       0.45-1.20
      14.0-30.0   ±1.00       0.60-1.40
Breakdown voltage :
Test condition Axes                  Type
25mm,electrode type  2760-1  2760-2  2760-3
Center value  ≥7.0  ≥4.0  ≥2.5
Lowest individual value  ≥5.0  ≥2.5  ≥1.5

 

Nominal Size 

Tolerance 

Wall Thickness

0.5-0.8

±0.10

0.20-0.40

1.0-3.0

±0.20

0.25-0.50

3.5-8.0

±0.25

0.35-1.00

9.0-12.0

±0.50

0.45-1.20

14.0-30.0

±1.00

0.60-1.40

Breakdown voltage:                                     KV

 

Test  condition Axes

Type

25mm,electrode type

2760-1

2760-2

2760-3

Center value

≥7.0

≥4.0

≥2.5

Lowest individual value

≥5.0

≥2.5

1.5