Silicone Rubber Fiberglass Sleeving (Inside Fiber And Outside Rubber)

Description

Silicone Rubber Fiberglass Sleeving (Inside Fiber And Outside Rubber)

It is weaved into tubes, then formed the product by painting with silicone rubber under high-temperature, with better electric-avoidness,self-extinguish ability and softness feature than Silicone fiberglass tubes. Widely uesd for insulating protection of H&N grade electrical machineries, household electric products, electric & heat equipments, special lightwares,ect.

Inside diameter measurement

           Inside diameter                  Wall thickness

       Range   Tolerance         4000V          7000V

    0.5-2.0mm    ±0.20mm   0.40mm±0.05mm     0.45±0.05mm

    2.5-3.0mm    ±0.25mm   0.40mm±0.05mm     0.50±0.05mm

    3.5-5.0mm    ±0.30mm   0.45mm±0.05mm     0.55±0.05mm

    6.0-9.0mm    ±0.40mm   0.50mm±0.05mm     0.60±0.05mm

  10.0-12.0mm      ±0.50   0.60mm±0.05mm     0.65±0.05mm

Specification(Table A)

                   ITEM                       VALUE

Continuous Operting Temperature -10℃+200℃

Temperature Endurance 200℃±2℃ 168h≥1/2 Rated Voltage

Aging Test 260℃, 6hours,no crack

Cold Bend No crack

Horizontal Flame Test <30 second 

Flame Retardance <30 second 

Volume Resistivity 1010Ω.cm

Submerge Water Test No pastiness,no distortion,no intenerate