English
Español
Home > Transformer Spare Parts > Amorphous Alloy Transformer Core
Products Catalogue
- Insulating Paper
- Composite Insulating Material
- Insulation Film
- Glass Fiber Sleeving
- Tape
- Laminated Products
- Mica Products
- Transformer Insulating parts
- Transformer Spare Parts
- Current Transformer
- Bimetal thermometer
- Dehydration of respite
- Hollow Porcelain Insulators
- Transformer bushings
- Magnetic wire
- Cable / Cable accessories
- Electric Motor Spare Parts
- Ring Main Units
Tags
Amorphous Alloy Transformer Core
Three-phase Three-Limb Amorphous Alloy Core
Product Brief
Three-phase three-limb amorphous alloy core is suitable for manufacturing Yy and Dy style transformers . And the transformer which make by three phase amorphous core has the features below : harmonious and beautiful dimension , small overlooking area , better economical of product structure . When high-capacity transformer uses this kind of structure, it should choose the suitable craftsmanship.
Characteristic
Under 50Hz and room temperature , the range of magnetic flux density of three phase limb will be between 1.15-1.35T , the no-load core loss and exciting power of the cores which made by the ribbon of lamination factor of 0.86 and width of 142 and 170 should match the requirements below
|
Magnetic flux density/T |
1.15 |
1.2 |
1.25 |
1.3 |
1.35 |
|
Specific core loss（W/Kg） |
0.18 |
0.192 |
0.204 |
0.228 |
0.264 |
|
Excitation（VA/Kg） |
0.35 |
0.363 |
0.425 |
0.56 |
0.7 |
S(B)H15-M Series Three-phase Three-limb Amorphous Alloy Core
Three-phase Five-Limb Amorphous Alloy Core
Three-phase five-limb amorphous core is suitable for manufacturing Dy style transformers . The design of core dimension retain the dimension of amorphous core that existing in the marker nowadays which can satisfy the requirement of assembly technique , equipment and capacity of amorphous transformer . The design of core joint use the advance structure of distribute stack .
Three-phase Five-Limb Amorphous Alloy Core
