What are the Inspection Items for Lightning Arresters?

1. Normal inspection
(1) The equalizing ring should be undamaged, and the ring surface should remain level;
(2) The installation should not be skewed, and there should be no noise inside;
(3) The base should be firm, without rust, and the grounding should be intact;
(4) The porcelain bottle should be clean and undamaged, without cracks, discharge phenomena or flashover marks;
(5) Check if the discharge counter is activated, whether there is moisture inside, and whether the upper and lower connection lines are intact;
(6) The leads should be complete, without loose strands or broken strands; the connection of the joint should be firm, with sufficient contact area; the conductor should not be too tight or too loose, and should not be corroded, with no burn marks.
2. Special inspection
(1) Do not approach the lightning protection equipment during thunderstorms;
(2) During foggy weather, check if there are discharge marks on the porcelain bottle part;
(3) During strong wind weather, check if there are hanging objects or swinging situations on the lightning arrester;
(4) After hail, check if there are damages to the porcelain bottle part and if the counter is damaged;
(5) After thunderstorms, check the action of the discharge counter, check if there is flashover on the surface of the lightning arrester, and make good records.
English
Spanish
Russian